manualshive.com logo in svg

Adaptec 5325301507 - Snap Server 4400 NAS, Administrator'S Manual

The Adaptec 5325301507 - Snap Server 4400 NAS is a powerful storage solution for your business needs. Make the most out of its features by referring to the comprehensive Administrator's Manual. Download this manual for free from our website and unlock the full potential of this remarkable product.

Share
Download
background image

Unicode and Expansion Arrays

Chapter 10  Unicode

145

Backing Up Using Unicode-Enabled UNIX Clients

Most Unicode-enabled UNIX clients run one of three language codes: 8859-1 (US), 

8859-15 (Europe), or EUC-JP (Japan). In each of these situations, it is important to 

backup via the UNIX client with a language compliant backup application. Mixing 

languages (example: having a Japanese UNIX server and a Chinese backup 

application) will lead to data corruption. If you do not have language compliant 

backup applications, do not back up using UNIX.

Backing Up Using Unicode-Enabled MacOS Clients

Macintosh text encoding UTF8 is supported by MacOS 10.1.4 AFP 3 and later. For 

Unicode to function properly, your version of MacOS must fully support AFP 3.
It is important to back up via the MacOS client with a language compliant backup 

application. Mixing languages (example: having Russian files on a server, then 

using a German backup application) will lead to data corruption.

Unicode and Expansion Arrays

This section outlines how SnapServer expansion arrays interact with Unicode.

Unicode Converted Expansion Arrays

When an expansion array is converted to Unicode, it stays converted to Unicode. 

This means that a Unicode enabled expansion array is only compatable with head 

units that have also been converted to Unicode.
The following is a usage scenario concerning expansion arrays and how they 

operate with Unicode enabled servers.
You have a SnapServer and an expansion array. You  enable Unicode on both. You 

cannot then attach the expansion array to a non-Unicode-enabled SnapServer.  The 

Unicode-enabled expansion unit will not be seen by a non-Unicode enabled server.
Once an expansion array has been converted to Unicode, it cannot be used with 

non-Unicode enabled SnapServers.

Summary of Contents for 5325301507 - Snap Server 4400 NAS



























































































































































































































































Reviews:

No comments

Related manuals for 5325301507 - Snap Server 4400 NAS

ZyXEL Communications ZyXEL EES-1024AF User Manual preview
ZyXEL EES-1024AF
Brand: ZyXEL Communications Pages: 99
IBM BladeCenter PN41 Problem Determination And Service Manual preview
BladeCenter PN41
Brand: IBM Pages: 88
Outdoor Furniture Plus Woodhaven 1/4 Assembly Instructions preview
Woodhaven 1/4
Brand: Outdoor Furniture Plus Pages: 2
HMS Networks Anybus Communicator ABC4018 User Manual preview
Anybus Communicator ABC4018
Brand: HMS Networks Pages: 64
Xblue Networks X-50 Quick Installation Manual preview
X-50
Brand: Xblue Networks Pages: 42
Sun Microsystems McDATA Eclipse 1620 Release Notes preview
McDATA Eclipse 1620
Brand: Sun Microsystems Pages: 9
Artesyn AXP640 Installation And Use Manual preview
AXP640
Brand: Artesyn Pages: 190
NMS Communications Vision VS 5000 Installing preview
Vision VS 5000
Brand: NMS Communications Pages: 22
Allied Telesis Routers and Switches Datasheet preview
Routers and Switches
Brand: Allied Telesis Pages: 15
IBM 88643RU - System x3850 - 8864 Service Manual preview
88643RU - System x3850 - 8864
Brand: IBM Pages: 192
HPE StoreVirtual 3200 Installation Manual preview
StoreVirtual 3200
Brand: HPE Pages: 54
CalDigit Tuff User Manual preview
Tuff
Brand: CalDigit Pages: 16
Belkin F5D7230au4P Manual preview
F5D7230au4P
Brand: Belkin Pages: 2
Caimore CM520-86WG User Manual preview
CM520-86WG
Brand: Caimore Pages: 79
Planet FGSW-2620PVS User Manual preview
FGSW-2620PVS
Brand: Planet Pages: 67
AT&T Business in a Box BIB NextGen Quick Start Manual preview
Business in a Box BIB NextGen
Brand: AT&T Pages: 9
Kraun KN.3R Quick Manual preview
KN.3R
Brand: Kraun Pages: 16
IBM TotalStorageFAStT900 User Manual preview
TotalStorageFAStT900
Brand: IBM Pages: 112

Brands by name

Popular brands

Load more brands