User's Manual | ACOM eBox | Ethernet Remote Control Device
October 2021
S e c t i o n DEVICE AND AMPLIFIER SETTINGS | Page 39 of 60
•
CAT Interface
Switch CAT interface between RS-232, TTL, BCD, Voltage or OFF;
•
CAT Baud rate
Set CAT Baud rate, possible values are between 1200 and 57600 bps;
•
CAT Commands
Select one of 5 possible CAT command sets (Set1
, Set2, …,
Set5);
•
CAT Byte spacing
Set CAT Byte spacing between 0 and 1500 ms;
•
CAT Polling time
Set CAT Polling time between 200 and 1800 ms or OFF;
•
Operate Access
Disable/Enable Operate Access restriction;
•
Auto Operate
Disable/Enable Auto Operate feature.
c)
Measurements
panel
Please, see
Figure 5-6 eBox with ACOM 700S connected
, Pos. (c).
The panel shows the values of 18 amplifier parameters that indicate power transistors regime, input signal,
temperature, and others.
Panel functional buttons:
•
Standby
Set the amplifier mode to Standby;
•
Operate
Set the amplifier mode to Operate.