User's Manual | ACOM eBox | Ethernet Remote Control Device
Page 26 of 60 | S e c t i o n DEVICE AND AMPLIFIER SETTINGS
October 2021
5.
DEVICE AND AMPLIFIER SETTINGS
5.1.
Device (eBox) Settings
When you use the eBox for a first time, the device is not configured to operate with a specific amplifier
model (factory setting). The first screen you will see is shown on
Figure 4-1 eBox web-interface access
. How to
select an amplifier model is described in Section
Once you are successfully logged-in, the
Home
and
Settings
menus will be shown in the menu bar of the
web-page. The ACOM eBox factory default settings (Administrator access level) are shown on
The settings screen is divided in panels in which the different parameters are thematically grouped.
a)
Device Status
panel
, Pos. (a)) displays the current firmware and library
versions, the serial number of the specific device, its physical network address (MAC address), the current
date and time as well as the total device uptime.
The panel is visible for both
User
and
Administrator
authentication levels.
If the eBox device does not have access to an Internet time-server (NTP server) the date
and time shown in
Device Status
Device Time
section may be incorrect, but this does
not affect the proper operation of the device.
b)
Network Status
panel
This panel (see
, Pos. (b)) displays the current settings for the IP
address, type of IP address (manually entered static address or DHCP assigned dynamic address), network
mask as well as primary and secondary DNS.
The panel is visible for both
User
and
Administrator
authentication levels.