Acom eBox, User Manual, Page: 19 / 60

User's Manual | ACOM eBox | Ethernet Remote Control Device
October 2021 S e c t i o n INSTALLATION | Page 19 of 60
b) Ethernet LAN connection
Please, see
Table 2-4 eBox LAN socket wiring
.
Connect a standard Ethernet plug-terminated cable between eBox LAN socket (located on front panel,
RJ-45 type, see
Figure 2-8
below) and your Ethernet hub/switch.
Figure 2-8 Front panel with Ethernet cable connected
Figure 2-8 Front panel with Ethernet cable connected
Table 2-4 eBox LAN socket wiring
LAN
interface
Pin Nr. Pin name Description Colors (T568A pin assignment)
RJ-45 socket,
8-pin, female
(Rear panel
view)
1 Rx+ Receive Data White - Green
2 Rx- Receive Data Green
3 Tx+ Transmit Data White - Orange
4 Unused - Blue
5 Unused - White - Blue
6 Tx- Transmit Data Orange
7 Unused - White - Brown
8 Unused - Brown
Table 2-4 eBox LAN socket wiring
You can order standard Ethernet cable with suitable length from your local IT store.
c) Power supply connection
NOTICE
In order to avoid any damage (not covered by the warranty), check carefully to be
certain that the voltage and power input plug of the eBox corresponds to your mains.
Always connect the power adapter last and disconnect it before all other connectors.
Connect the power supply adapter cable to the eBox
POWER socket (on eBox rear panel, see
Figure 2-5
Rear panel - Connections
).