User's Manual | ACOM eBox | Ethernet Remote Control Device
Page 28 of 60 | S e c t i o n DEVICE AND AMPLIFIER SETTINGS
October 2021
c)
General
panel
, Pos. (c)) contains the general settings of the eBox. You
can change all available fields: Call Sign, Time Zone, Admin Name, Admin Password, User Name, and User
Password.
The panel is visible for
Administrator
authentication level only.
Panel functional buttons:
•
Reboot Device
When it is pressed a confirmation window pops-up. If you confirm reboot, the information
screen will be shown (see
) while the device reboots. When reboot
is done, you will need to log-in again;
•
Revert
When it is pressed all the changes in the panel will go back to the last saved values;
•
Save
When it is pressed all the changes in a panel are saved;
•
Restore All Except IP
This button is used to restore all device settings to factory defaults, except the IP address (in
this way, the connection to the device will be kept). When the button is pressed, a
confirmation window pops-up. If you confirm restore, the information screen will be shown
while the device restores. When restore is done, you will need to log-in again.
Figure 5-2 eBox Reboot page
Figure 5-2 eBox Reboot page