User's Manual | ACOM eBox | Ethernet Remote Control Device
October 2021
S e c t i o n DEVICE AND AMPLIFIER SETTINGS | Page 29 of 60
d)
Network
panel
, Pos. (d)) contains the network settings of the eBox.
You can change all available fields: DHCP, IP address, Network Mask, Gateway, Primary DNS address, and
Secondary DNS address.
The panel is visible for
Administrator
authentication level only.
Panel functional buttons:
•
Revert
When it is pressed all the changes in the panel will go back to the last saved values;
•
Save
When it is pressed all the changes in a panel are saved;
•
DHCP: Disable / Enable
When
Disable
is selected, the device will NOT receive automatically network settings from a
DHCP (Dynamic Host Configuration Protocol) server. In this case, you have to define all
network settings (IP address, Network Mask, Gateway, Primary DNS address, and Secondary
DNS address) manually;
When
Enable
is selected, the device will receive automatically network settings from a DHCP
(Dynamic Host Configuration Protocol) server.
Be careful when selecting DHCP
Enable
. If you don't know the new assigned IP address
of eBox, the device will be inaccessible.
In such a case you have to reset the device via the
RESET
button located on rear panel
(see Section
7.3 Reset to Factory Default Settings
For details on NETWORK SETTINGS and how to connect eBox to your LAN network,
please, contact a local IT professional or your Internet provider.
e)
SNMP Agent
panel
, Pos. (e)) contains the settings for the SNMP (Simple
Network Management Protocol) communication. For details, please, see Section
amplifiers through Simple Network Management Protocol (SNMP)
The panel is visible for
Administrator
authentication level only.
f)
HTTP Server
panel
, Pos. (f)) contains the settings about login session
lengths and connection port.
The panel is visible for
Administrator
authentication level only.