User's Manual | ACOM eBox | Ethernet Remote Control Device
Page 22 of 60 | S e c t i o n ON-LINE CONNECTION
October 2021
4.
ON-LINE CONNECTION
4.1.
Connecting eBox to Your LAN Network
When the eBox is connected to your LAN network as described in Section
, its IP address
must be used to access its web-interface in an any web browser, running on a device (PC, smart phone, or
tablet) connected to the same LAN network.
Most of the pictures and operating descriptions in this User's Manual are based on the
PC with Windows 10, Firefox Internet browser, and ACOM 2000A and 700S amplifiers.
Consult the specific technical glossary
manual.
To access the eBox web-interface you need the following default data (factory settings):
•
IP address
192.168.1.2
•
Subnet mask
255.255.255.0
•
Gateway
192.168.1.1
•
DNS
192.168.1.1
Start your preferred web-browser and enter in the address bar the IP address of the device (see
, Pos. (1)) and press ENTER. If the IP address was changed in the
Settings
Device
Network
menu, the new IP address needs to be used.
Figure 4-1 eBox web-interface access
Figure 4-1 eBox web-interface access
1
2