User's Manual | ACOM eBox | Ethernet Remote Control Device
Page 24 of 60 | S e c t i o n ON-LINE CONNECTION
October 2021
4.2.
Login and Authentication
Authentication is required for amplifier remote control through the ACOM eBox web interface or to
change/set the eBox device settings.
To log-in, please, click on
Login
link (see
Figure 4-1 eBox web-interface access
, Pos. (2)). The
Login
window will
pop-up (see
Figure 4-3 eBox Login page
Figure 4-3 eBox Login page
There are two levels of authentication (access levels) -
User
and
Administrator
. For your daily work with
the device, it is recommended to use the
User
level.
To access the eBox web-interface you need the following default data (factory settings):
•
User
authentication level
-
User name:
user
-
Password:
pass
•
Administrator
authentication level
-
User name:
admin
-
Password:
pass
The
User
authentication level has full access to the
Settings
Amplifier
menu (amplifier controls - Power
on/off, Changing bands, Selecting visible measurements, etc.), however its rights to the
Settings
Device
menu are limited only to reviewing the eBox device and network status, setting up the interface refresh
rate and set up the average and peak adjustments.
The
Administrator
authentication level has full access to all settings of the device.