Abit SE6, User Manual, Page: 50 / 148

3-20 Chapter3
SE6
Notice
Don’t forget your password. If you forget the password, you will have to open the
computer case and clear all information in the CMOS before you can start up the
system. But by doing this, you will have to reset all previously set options.
OS Select For DRAM > 64MB:
When the system memory is bigger than 64MB, the communication method between the
BIOS and the operating system will differ from one operating system to another. If you use
OS/2, select
OS2 ; if you are using another operating system, select Non-OS2 . The default
setting is Non-OS2 .
Report No FDD For WIN 95:
When using Windows
®
95 without a floppy drive, please set this item to Yes . Otherwise, set
it to No . The default setting is No .
Delay IDE Initial (Secs):
This item is used to support some old models or special types of hard disks or CD-ROMs.
They may need a longer amount of time to initialize and prepare for activation. Since the
BIOS may not detect those kinds of devices during system booting. You can adjust the value
to fit such devices. Larger values will give more delay time to the device. The minimum
number you can enter is 0, the maximum number you can enter is 15. The default setting is
0 . For best system performance, we strongly suggest you to set it to 0.