Abit SE6, User Manual

Page: 22 / 148

2-12 Chapter2
SE6
Note
Before you clear the CMOS, you have to first turn the power off (including the +5V
standby power). Otherwise, your system may work abnormally or malfunction.
(13) AIMM (AGP Inline Memory Module) Slot
This function is used for installing an AGP
Inline Memory Module (optional model
RM04). This is an optional feature to
improve the on board VGA by enhancing
the 3D performance.
Note: Watch the pin position and the
orientation.
(14) PN1 and PN2 Headers
PN1 and PN2 are for switches and indicators
of the chassis’ front panel. There are several
functions that come from these two headers.
You have to watch the pin position and the
orientation, or you may cause system
malfunctions. Figure 2-7 shows you the
functions of PN1 and PN2.
Figure 2-7. The definition of PN1 and
PN2 pins