Abit SE6, User Manual

Page: 68 / 148

3-38 Chapter3
SE6
another computer via a network by sending a wake-up frame signal. This feature also allows
the PCI card built-in hardware function to support the wake up function without special
cables connected to the motherboard.
Note
This feature needs a specific network interface which is optional. Also your ATX power
5V standby power must be at least 720mA compatible.
Power On by Ring:
Two options are available: Enabled and Disabled. Default setting is Disabled . If you connect
an external modem to the onboard serial port, the system will be turned on when a telephone
ring-up occurs.
USB KB Wake-Up From S3:
Two options are available: Enabled and Disabled. Default setting is Disabled.
CPU Thermal-Throttling
This option is used during Suspend To RAM (STR) mode. It controls the CPU speed as a
percentage of regular power. Options include 87.5%, 75.0%, 62.5%, 50.0%, 37.5%, 25.0%,
12.5%. The default setting is set at 62.5%.
Resume by Alarm:
Two options are available: Enabled and Disabled. Default setting is Disabled . The RTC
alarm can turn on the system. You can set Date (of month) and Time (hour, minute, and
second) when you set this item to
Enabled .
Reload Global Timer Events
When one of the specified events occur, the count down made for entry in power saving
mode goes back to zero. Since the computer will enter a power saving mode only after an
inactivity delay specified (time specific for Doze, Standby and Suspend modes) and after it
has no activity, during this time period, any event will cause the computer to re-count the
time elapsed. Resume events are operations or signals that cause the computer to resume
time counting.