Abit SE6 User Manual Download Page 147

Page: 147 / 148

How to Get Technical Support

P-3

User’s Manual

In North America and South America please contact:

ABIT Computer (USA) Corporation
46808 Lakeview Blvd.
Fremont, California 94538 U.S.A.

[email protected]

[email protected]
Tel: 1-510-623-0500
Fax: 1-510-623-1092

In the UK and Ireland:

ABIT Computer Corporation Ltd.
Caxton Place, Caxton Way,
Stevenage, Herts SG1 2UG, UK

[email protected]
[email protected]

Tel: 44-1438-741 999
Fax: 44-1438-742 899

In Germany and Benelux (Belgium, Netherlands, Luxembourg)
countries:

AMOR Computer B.V. (ABIT's European Office)
Van Coehoornstraat 5a,
5916 PH Venlo, The Netherlands

[email protected]
[email protected]

Tel: 31-77-3204428
Fax: 31-77-3204420

All other territories not covered above please contact:

Taiwan Head Office

When contacting our headquarters please note we are located in
Taiwan and we are 8+ GMT time. In addition, we have holidays that
may be different from those in your country.

ABIT Computer Corporation
3F-7, No. 79, Sec. 1, Hsin Tai Wu Rd.
Hsi Chi, Taipei Hsien
Taiwan, R.O.C.

Summary of Contents for SE6





















































































































































Search results

Summary of Contents for SE6

Reviews:

Related manuals for SE6

Brands by name

Popular brands

Abit SE6, User Manual

Search results

Summary of Contents for SE6

Reviews:

Related manuals for SE6

Brands by name

Popular brands