110
Tru O N E® AT S , I N S TA LL ATI O N A N D O PER ATI N G I N S TR U C TI O N
1
L
CD
, T
O
U
CH
5.6.8.2 Access from the display
/ Ekip Com Hub
With modules energized the presence of
the modules on the module slot activates
additional menus on the display:
• To set the addressing of the modules.
• In order to display information on the
modules.
The following table illustrates the path
from the display, for setting the function
and addressing of the modules:
Settings (*Default value)
Description
:
Modules (Optional modules)
Ekip Com Hub
Enable
Off*
Switch communication between module and
server
On
Force Static IP address
Off*
Dynamic IP address.
On
Static IP address.
Se
On all the associated parameters are enabled.
Static IP Address
0.0.0.0*
Enables the static IP to be selected.
Network Mask Static
0.0.0.0*
Enables the subnet mask to be selected.
Static Gateway addr
0.0.0.0*
When there are several subnets, enables the IP
address of the node to which the module is
connected to be selected.
SNTP Client Enabled
Off*
Enables the SNTP protocol for distribution of the
clock and synchronization signal to be enabled.
On
SNTP Server Address
0.0.0.0*
Enables the network server that supplies the
SNTP to be set.
Password
---
Code required to register module on cloud.
Remote firmware update
Enables the firmware of the module to be
updated.
OFF Automatic*
Enable
To configure firmware download.
Automatic
To automate module update.
:
—
Table 5.32 The path for setting the function and addressing of the modules of the Ekip Com Hub -module from the display
Summary of Contents for TruONE ATS
