optical loop or RS485 network, take this into account when making the communication setup
in the communication master (the PC).
With local fiber optic communication, communication speed is usually set to 19200 or 38400
baud. With telephone communication, the speed setting depends on the quality of the
connection and the type of modem used. Refer to technical data to determine the rated
communication speed for the selected communication interfaces.
The IED does not adapt its speed to the actual communication conditions
because the communication speed is set on the local HMI.
17.6
IEC 60870-5-103 communication protocol
IP14615-1 v2
17.6.1
Application
IP14864-1 v1
M17109-3 v7
TCP/IP
Control Center
IED
IED
IED
Gateway
Star coupler
Station HSI
IEC05000660-4-en.vsd
IEC05000660 V4 EN-US
Figure 222: Example of IEC 60870-5-103 communication structure for a substation
automation system
IEC 60870-5-103 communication protocol is mainly used when a protection IED communicates
with a third party control or monitoring system. This system must have software that can
interpret the IEC 60870-5-103 communication messages.
When communicating locally in the station using a Personal Computer (PC) or a Remote
Terminal Unit (RTU) connected to the Communication and processing module, the only
hardware needed is optical fibers and an opto/electrical converter for the PC/RTU, or a RS-485
connection depending on the used IED communication interface.
Section 17
1MRK 505 370-UEN D
Station communication
412
Busbar protection REB670
Application manual
Summary of Contents for REB670 Series
