7.3 Managing Dashboards
Overview
Dashboards are used to display the controller parameters, RAPID data, live values
from I/O signals, and so on.
The values are displayed through dashboards. The dashboards are made up of
cards. Each card displays a value based on its defined properties. A dashboard
can hold a maximum of 6 cards.
xx1800001860
Defining cards
Use the following procedure to define a card:
1 On the start screen, tap
Operate
, and then select
Define Cards
from the
menu.
2 Tap
Create New Card
on the context menu.
The
Add Card
page is displayed.
3 Type or select the values in the title, Label, Value, and Unit fields.
4 Tap
Apply
.
The new card is created and displayed on the
Define Cards
page.
Once a card is created you can associate the card to dashboards. For more details,
see
Assigning cards to dashboard on page 219
.
Continues on next page
218
Operating manual - OmniCore
3HAC065036-001 Revision: J
© Copyright 2019-2021 ABB. All rights reserved.
7 Running in production
7.3 Managing Dashboards
Summary of Contents for OmniCore
