6.8.3 Copying a payload
Procedure
Use the following procedure to create the copy of a workobject:
1 On the start screen, tap
Code
, select
Program Data
from the menu, and tap
the
loaddata
data instance type.
The data of type loaddata are displayed.
Note
You can also create the copy of a loaddata from
Calibrate
. For this, on the
start screen, tap
Calibrate
, select
Payload
from the menu, and continue
with the following steps.
2 Tap
Copy
on the context menu for the loaddata that you want to copy.
A confirmation window is displayed.
3 Tap
OK
.
A copy of the selected loaddata is created.
Note
The copied loaddata has the same values as the original, but the name is unique.
166
Operating manual - OmniCore
3HAC065036-001 Revision: J
© Copyright 2019-2021 ABB. All rights reserved.
6 Programming and testing
6.8.3 Copying a payload
Summary of Contents for OmniCore
