Home
/
ABB
/
OmniCore
/
Operating Manual

ABB OmniCore, Operating Manual, Page: 220 / 266

Share

Page: 220 / 266

ABB OmniCore Operating Manual Download Page 220

5 Select the dashboards that needs to be associated with the selected card.

Note

You can associate a maximum of 6 cards to each dashboard. So if a
dashboard already has 6 associated cards then you cannot associate the
selected card to that dashboard.

6 Tap

OK

.

The

Edit Card

page is displayed with the list of associated dashboards.

7 Tap

Apply

.

The selected card is associated with the selected dashboards.

Deleting cards from dashboards

Use the following procedure to delete the associate cards from a dashboard:

1 On the start screen, tap

Operate

, and then select

Define Dashboards

from

the menu.

2 The

Define Dashboards

page is displayed. The current available dashboards

are displayed on this page.

3 Tap on a dashboard for which the associated cards needs to be deleted.

The

Edit Dashboard

page is displayed. The

Associated Cards

section

displays the cards that are already associated to the selected dashboard.

4 Tap on the delete icon next to the card that you want remove from the selected

dashboard.

The card is deleted from the

Associated Cards

section.

5 Tap

Apply

.

The changes are saved.

220

Operating manual - OmniCore

3HAC065036-001 Revision: J

© Copyright 2019-2021 ABB. All rights reserved.

7 Running in production

7.3 Managing Dashboards

Continued

«
...
218
219
220
221
222
...
»

Summary of Contents for OmniCore











































































































































































































































































Reviews:

No comments