ABB IRC5 with FlexPendant, Operating Manual

Page: 155 / 306

Action
Tap File , then Save Module As...
en0400000690
3
Tap on the suggested file name and use the soft keyboard to enter the module's name.
Then tap
OK .
4
Use the file searching tool to locate where you want to save the module. See section
FlexPendant Explorer on page 56 . The default location is on the controller disk, but
any other location may be set as default as detailed in section Setting default paths
on page 100 .
5
Then tap OK .
The module is saved.
Renaming a module
This section describes how to rename a module.
Action
On the ABB menu, tap Program Editor . 1
Tap Modules . 2
Tap File , then Rename Module...
The soft keyboard is displayed.
3
Use the soft keyboard to enter the module's name. Then tap OK . 4
Changing type of module
This section describes how to change the type of module.
Action
On the ABB menu, tap Program Editor . 1
Tap Modules and select the module to be changed. 2
Tap File , then Change declaration... 3
Tap Type and select module type. 4
Continues on next page
Operating manual - IRC5 with FlexPendant 155
3HAC050941-001 Revision: G
© Copyright 2018 ABB. All rights reserved.
5 Programming and testing
5.3.2 Handling of modules
Continued