ABB FEX300, Operating Instruction

Page: 78 / 176

Parameterization
78 FEX300, FEX500 OI/FEX300/FEX500-EN
g
7.2.3 Switching to the configuration level (parameterization)
The device parameters can be displayed and changed on the configuration level.
Process display
1. Use to switch to the information level.
Access Level
Read Only
Standard
Advanced
Next OK
2. Use or to select the access level.
3.

Use to confirm your selection.
Important (Notice)
There are four access levels: For the "Standard" and "Advanced" levels you can define
passwords. There are no factory default passwords.
• On
the „Read Only“ level all entries are disabled. Parameters are read only and cannot be
modified.
• On the "Standard " level you can edit all parameters described in Chapter 7.4 "Description
of parameters" except for those written in italics .
• On the "Advanced" level all parameters can be modified.
• The Service menu is reserved to the customer service.
Once you have logged on to the corresponding access level, you can edit or reset the
password. Resetting to the "No password defined" state is done by selecting "

" as the
password.
Enter Password
********
QRSTUVWXYZ

0123456
Next OK
4.

Enter the corresponding password (see Chapter
"Selecting and changing parameters").
There is no factory default for the password. You can
switch to the configuration level without entering a
password.
The selected access level remains active for 3 minutes.
Within this time period you can toggle between the
process display and the configuration level without re-
entering the password.
5.

Use to confirm your password.
The LCD display now indicates the first menu item on the
configuration level.
6.

Use or to select a menu.
7.

Use to confirm your selection.