ABB ACS880 ESP, Firmware Manual

Page: 345 / 494

Parameters 345
Saving A user set is being saved. 2
Faulted Invalid or empty parameter set. 3
User set 1 User set 1 has been loaded. 4
User set 2 User set 2 has been loaded. 5
User set 3 User set 3 has been loaded. 6
User set 4 User set 4 has been loaded. 7
96.11 User set save/load Enables the saving and restoring of up to four custom sets
of parameter settings. See section
User parameter sets
(page 92 ).
The set that was in use before powering down the drive is
in use after the next power-up.
Notes:
• Hardware configuration settings such as I/O extension
module, fieldbus and encoder configuration parameters
(groups 14…16, 47, 51…56, 58 and 92…93) are forced
input/output values (such as 10.03 and 10. 04) are not
included in user parameter sets.
• Parameter changes made after loading a set are not
automatically stored – they must be saved using this
parameter.
No action
No action Load or save operation complete; normal operation. 0
User set I/O mode Load user parameter set using parameters 96.12 User set
IO sel in1 and 96.13 User set IO sel in2 .
1
Load set 1 Load user parameter set 1. 2
Load set 2 Load user parameter set 2. 3
Load set 3 Load user parameter set 3. 4
Load set 4 Load user parameter set 4. 5
Save to set 1 Save user parameter set 1. 18
Save to set 2 Save user parameter set 2. 19
Save to set 3 Save user parameter set 3. 20
Save to set 4 Save user parameter set 4. 21
96.12 User set IO sel in1 When parameter 96.11 User set save/load is set to User
set I/O mode , selects the user parameter set together with
parameter 96.13 User set IO sel in2 as follows:
Not selected
Not selected 0. 0
Selected 1. 1
DI1 Digital input DI1 ( 10.02 DI delayed status , bit 0). 2
DI2 Digital input DI2 ( 10.02 DI delayed status , bit 1). 3
No. Name/Value Description Def/
FbEq16
Status of
source defined
by par.
96.12
Status of
source defined
by par.
96.13
User parameter
set selected
0 0 Set 1
1 0 Set 2
0 1 Set 3
1 1 Set 4