ABB ACS880-14, Hardware Manual

Page: 132 / 248

Required parts
Drive module standard parts
•Drive module and LCL filter module
•Fastening brackets (2 pcs)
•Pedestal guide plates (2 pcs)
•Telescopic extraction/installation ramp
•Fastening screws and insulators in a plastic bag
•External control unit
Rittal parts / Alternative ABB parts
Description Qty (pcs) Rittal part code
Enclosure without bottom plates and side panels. Includes supports
for installing air baffles. 1 8806.000
Spacers for roof plates / ABB roof 1 7967.000
(one set = four pieces)
Punched section with mounting flange, inner mounting level for
800 mm horizontal 1 8100.743
Air filter. Remove the filter mats. 4 Contact ABB for the suitable filter
Alternative ABB parts for Rittal parts
See section Air inlet kits (page 174)
2 ABB air inlet kit 800 mm
3AUA0000117005 (IP20)
3AUA0000117009 (IP42)
See section Air outlet kits (page 176)
2 ABB air outlet kit 800 mm
3AUA0000125203 (IP20 )
3AUA0000114968 (IP42)
Customer-made parts (not ABB or Rittal products)
See section Air baffles (page 210)
4 Air baffles
See section Bottom plate (page 209)
1 Bottom plate
Required tools
• Set of screw drivers (Torx and Pozidriv)
• Set of metric magnetic-end hexagon sockets
• Torque wrench
• Step drill bit for drilling the holes in the clear plastic shroud for input power cables
Overall flowchart of the installation process
For instructions, see Task Step
Installing the drive module and LCL filter module
into an enclosure (page 133)
Install the Rittal parts, drive bottom guide plate
and loose drive options in the drive module cu-
bicle 1
The component manufacturer’s instructions Install the auxiliary components (such as mount-
ing plates, switches, busbars etc.) 2
Preventing the recirculation of hot air (page 60)
Installing the drive module and LCL filter module
into an enclosure (page 133)
Attach the drive module and LCL filter module
into the enclosure 3
132 Installation example of the standard drive module configuration in Rittal VX25 enclosure