ABB ACS880-14, Hardware Manual

Page: 195 / 248

Efficiency
Approximately 96.5% at nominal power level.
Protection classes for module
IP20 (standard) Degrees of protection
(IEC/EN 60529)
IP00 (0B051)
UL Type Open Enclosure types
(UL 61800-5-1)
III Overvoltage category
(IEC/EN 60664-1)
I Protective class
(IEC/EN 61800-5-1)
Ambient conditions
The table shows environmental limits for the drive. The drive must be used in a heated,
indoor, controlled environment.
Transportation Storage Operation
in the protective package in the protective package installed for stationary use
- - For TN and TT neutral-
grounded network systems
and IT ungrounded net-
work systems: 0 to 4000 m
(13123 ft) above sea level Installation site altitude
Above 1000 m [3281 ft]):
see
When is derating ne-
cessary (page 181)
-40…+70 °C
(-40…+158 °F) -40…+70 °C
(-40…+158 °F)
-15…+55 °C (5…131 °F).
No frost allowed. See
When is derating neces-
sary (page 181)
Surrounding air
temperature
Max. 95% Max. 95% 5…95% Relative humidity
No condensation allowed. Maximum allowed relative humidity is 60% in the pres-
ence of corrosive gases.
IEC 60721-3-2:1997 IEC 60721-3-1:1997 IEC/EN 60721-3-3:2002 Contamination
Class 2C2 Class 1C2 Class 3C2 Chemical gases
Class 2S2 Class 1S3. (packing must
support this, otherwise
1S2) Class 3S2. No conductive
dust allowed. Solid particles
2 Pollution degree
60…106 kPa 70…106 kPa 70…106 kPa Atmospheric pressure
0.6 … 1.05 atmospheres 0.7 … 1.05 atmospheres 0.7 … 1.05 atmospheres
Max. 3.5 mm (0.14 in)
(2…9 Hz), max. 15 m/s
2
(49 ft/s
2
) (9…200 Hz) si-
nusoidal
Max. 1 mm (0.04 in) (5 …
13.2 Hz), max. 7 m/s
2
(23 ft/s
2
) (13.2 … 100 Hz)
sinusoidal
Max. 0.1 mm (0.004 in)
(10…57 Hz), max. 10 m/s
2
(33 ft/s
2
) (57…150 Hz) si-
nusoidal
Vibration
IEC 60068-2-6:2007,
EN 60068-2-6:2008
Technical data 195