ABB ACS880-14, Hardware Manual

Page: 16 / 248

General safety in installation, start-up and maintenance
These instructions are for all personnel who do work on the drive.
WARNING!
Obey these instructions. If you ignore them, injury or death, or damage to the
equipment can occur.
• Keep the drive in its package until you install it. After unpacking, protect the drive from
dust, debris and moisture.
• Use the required personal protective equipment: safety shoes with metal toe cap, safety
glasses, protective gloves and long sleeves, etc. Some parts have sharp edges.
• Lift a heavy drive with a lifting device. Use the designated lifting points. See the dimension
drawings.
• Incorrect lifting can cause danger or damage. Obey the local laws and regulations
applicable to lifting, such as requirements for planning the lift, for capacity and condition
of lifting equipment, and for training of personnel.
• Attach the drive cabinet to the floor to prevent it from toppling over. The cabinet has a
high center of gravity. When you pull out heavy components or power modules, there is
a risk of overturning. Attach the cabinet also to the wall when necessary.
• Do not use the module extraction/installation ramp with plinth heights which exceeds the
maximum allowed height.
• Attach the module extraction/installation ramp carefully.
16 Safety instructions
3