ABB ACS560, Quick Installation And Start-Up Manual

Page: 194 / 306

￭
BIO-01 विद्युत कनेक्शन
BIO-01 I/O extension module 157
Electrical installation
Refer to Electrical installation on page 55 . If you configure the inputs, set up the
wiring accordingly. The BIO-01 module has removable spring clamp terminals. Use
ferrules on the multistranded cables before assembly.
Sample wiring with the ABB standard macro:
Start-up
The BIO-01 module is automatically identified by the drive firmware. To configure the
inputs refer to the
ACS480 firmware manual
(3AXD50000047399 [English])
.
Terminals
External sample connection
Description Base
unit
Internal connection
Aux. voltage output and prog. digital input
+24V Aux. 24 V DC, max. 200 mA X
DGND Aux. voltage output common X
DCOM Digital input common for all X
DI1 Stop (0)/Start (1) X
DI2 Forward (0)/Reverse (1) X
Digital and analog I/O extension BIO-01
DI3 Constant frequency/speed selection
DI4 Constant frequency/speed selection
DI5 Ramp set 1 (0)/Ramp set 2 (1)
DO1 Not configured
AI1 Output frequency/speed ref: 0...10 V
+10V Ref. v10 V DC (max. 10 mA)
GND Analog circuit common / DO common
SCR Signal cable shield / DO screen
Safe torque off (STO)
SGND Safe torque off. Factory connection.
Both circuits must be closed for the
drive to start. X
IN1 X
IN2 X
OUT1 X
￭ BIO-01 इंस्टॉल करें
By default, RIIO-01 module is provided in ACS560 standard R0...R2 drives. You can
remove the RIIO-01 module and can install BIO-01 and/or fieldbus adapter module
(+Fxxx).
BIO-01 / ,
1.
2. RIIO-01 ,
RIIO-01 ACS560-01 R0 ... R2
a.
b.
RIIO-01
194 HI - त्वरित इंस्टालेशन और स्टार्ट - अप गाइड
EN
HI