ABB ACS560 Quick Installation And Start-Up Manual Download Page 36

Page: 36 / 306

￭

Display

The control panel display shows the following elements:

Control location and related icons: Indicates how the drive is controlled.

•

Loc: The drive is in local control, that is, controlled from the control panel.

•

Rem: The drive is in remote control, that is, controlled through I/O or fieldbus.

Rotation direction: Shows the forward (clockwise) or reverse (counter-clockwise)
rotation of motor.

Main: Navigates to the Main menu. See description in below sections.

Option: Navigates to the Options menu. See description in below sections.

Reference value: Allows to define the reference value of speed, frequency or current
and its unit using the Up/Down arrow buttons.

Actual value: Displays the value of the parameter selected in parameter

49.19

Basic panel home view 1 by default.

36 EN - Quick installation and start-up guide

Summary of Contents for ACS560


















































































































































































































































































































Search results

Summary of Contents for ACS560

Reviews:

Related manuals for ACS560

Brands by name

Popular brands

ABB ACS560, Quick Installation And Start-Up Manual

Search results

Summary of Contents for ACS560

Reviews:

Related manuals for ACS560

Brands by name

Popular brands