ABB ACS560, Quick Installation And Start-Up Manual

Page: 39 / 306

1
2
4
6
3
5
7
Start mode – Automatic, constant time, Fast 1
Stop mode – Coast, Ramp 2
Acceleration time - Time for speed to change from zero to the speed defined by
parameter. 3
Deceleration time - Time for speed to change from the speed defined by parameter
to zero. 4
Maximum frequency/ Speed - Maximum allowed frequency/speed. 5
Maximum current - Maximum allowed current. 6
Minimum frequency/ Speed - Minimum allowed frequency/speed. 7
→
Selected start mode is Automatic.
1 2
1) Automatic - Default start mode. Guarantees optimal motor start in most cases.
It includes the flying start function (starting into a rotating motor) and the auto-
matic restart function. The drive motor control program identifies the flux as well
as the mechanical state of the motor and starts the motor instantly under all
conditions. 1
2) Constant - Enables constant pre-magnetizing time (the motor start is synchron-
ized with the release of a mechanical brake). 2
3) Fast - The pre-magnetizing time is determined automatically, being typically
200 ms to 2 s depending on motor size. This mode does not have a shortcut icon. 3
→
Selected stop mode is Coast.
EN - Quick installation and start-up guide 39
EN
HI