ABB ACS560, Quick Installation And Start-Up Manual

Page: 167 / 306

What to do Cause Fault / Aux.
code aux code
visible only on
assistant con-
trol panel and
drive com-
poser)) Code
(hex)
3 - AI2LessMIN 1 - AI1LessMIN
4 - AI2GreaterMAX 2 - AI1GreaterMAX
Check the source of the fault
(parameter 32.07 Supervision 1 sig-
nal). Fault generated by the
signal supervision func-
tion 1. Signal supervi-
sion 1 80B0
Check the source of the fault
(parameter 32.17 Supervision 2 sig-
nal). Fault generated by the
signal supervision func-
tion 2. Signal supervi-
sion 2 80B1
Check the source of the fault
(parameter 32.27 Supervision 3 sig-
nal). Fault generated by the
signal supervision func-
tion 3. Signal supervi-
sion 3 80B2
Check the source of the fault
(parameter 32.37 Supervision 4 sig-
nal). Fault generated by the
signal supervision func-
tion 4. Signal supervi-
sion 4 80B3
Check the source of the fault
(parameter 32.47 Supervision 5
signal). Fault generated by the
signal supervision func-
tion 5. Signal supervi-
sion 5 80B4
Check the source of the fault
(parameter 32.57 Supervision 6
signal). Fault generated by the
signal supervision func-
tion 6. Signal supervi-
sion 6 80B5
Check external device and paramet-
er 31.01 External event 1 source. Fault in external device 1. External fault 1 9081
Check external device and paramet-
er 31.03 External event 2 source. Fault in external device 2. External fault 2 9082
Check external device and paramet-
er 31.05 External event 3 source. Fault in external device 3. External fault 3 9083
Check external device and paramet-
er 31.07 External event 4 source. Fault in external device 4. External fault 4 9084
Check external device and paramet-
er 31.09 External event 5 source. Fault in external device 5. External fault 5 9085
Informative warning. (See paramet-
er 99.13 ID run requested) Current offset and gain
measurement calibration
will occur at next start. Current calibra-
tion A2A1
Diagnostics 167
EN
HI