Global SIP Settings
41-001343-02 REV05 – 07.2014
4-86
Per-Line Configuration
1.
Click on
Advanced Settings->Line <1 - 9>->Autodial Settings.
2.
Perform one of the following actions:
•
To allow this line to use the global autodial settings, click on the
Use Global Settings
parameter to enable it, then click
Save Settings
to
save your changes.
•
To specify a different autodial configuration for this specific line, disable the
Use Global Settings
parameter. Then proceed to step 3.
3.
In the “
Autodial Number
” field, specify the SIP number for this line that the IP phone dials whenever the IP phone is off-hook as follows:
•
If set to -1, then the global autodial settings for this IP phone to this line.
•
If set to empty (blank), then disable Autodial on this line.
•
If set to a valid SIP number, dial the SIP number specified for this line. For example:
8500
4.
In the
“Autodial Timeout”
field, specify a value, in seconds, for the timer for this line as follows:
•
If you want the IP phone to autodial the number immediately (hotline) whenever the IP phone is off-hook, accept the default value of
0.
•
If you want to specify a length of time for the IP phone to wait before dialing the number, enter the length of time (in seconds). For exam-
ple:
30
Valid values are 0 to 120.
5.
Click
Save Settings
to save your changes.
Aastra Web UI
