Home
/
Aastra
/
6737i
/
Administrator'S Manual

Aastra 6737i, Administrator'S Manual, Page: 213 / 888

Share

Page: 213 / 888

Aastra 6737i Administrator'S Manual Download Page 213

Global SIP Settings

41-001343-02 REV05 – 07.2014

4-66

For the 6739i:

10.

Enter an IP address or fully qualified host name in the

Registrar Server

field. Default is

0.0.0.0

.

A global value of 0.0.0.0 disables registration. However, the phone is still active and you can dial using username@ip address of the phone.

If the Registrar IP address is set to 0.0.0.0 for a per-line basis (i.e., line 1, line 2, etc.), then the register request is not sent, the "No Service" mes-
sage does not display, and the message waiting indicator (MWI) does not come on.

11.

Enter a Registrar Port number in the

Registrar Port

field for accessing the SIP registrar server.

Default is

0

.

12.

Press

Done

to save the changes.

Enabling/Disabling the Use of the Registrar Server

13.

Select

SIP

Register

.

14.

Press

Change

to set Register to "

Yes

" (enable) or "

No

" (disable). Default is “

Yes

”.

This parameter enables/disables the IP phone to register on the network.

15.

Press

Done

to save the changes.

Note:

The session prompts you to restart the IP phone to apply the configuration settings.

16.

Select

Restart.

Note:

You can set global configuration only using the IP Phone UI.

IP Phone UI

1.

Press the

Options

key on the phone to enter the Options List.

2.

Press the

Advanced

button. A keyboard displays.

3.

Enter the Administrator password using the keyboard. Default is “

22222

”.

4.

Press the

SIP

button.

Configuring Proxy IP and Proxy Port

5.

Press

Proxy Server

and

enter an IP address or fully qualified host name in the

Proxy Server

field. Default is

0.0.0.0

.

6.

Press

Proxy Port

and enter a Proxy Port number in the

Proxy Port

field for accessing the SIP proxy server. For example,

5060

. Default is

0

.

Configuring Registrar IP and Registrar Port

7.

Press

Registrar Server

and enter an IP address or fully qualified host name in the

Registrar Server

field. Default is

0.0.0.0

.

A global value of 0.0.0.0 disables registration. However, the phone is still active and you can dial using username@ip address of the phone.

If the Registrar IP address is set to 0.0.0.0 for a per-line basis (i.e, line 1, line 2, etc.), then the register request is not sent, the "No Service" mes-
sage does not display, and the message waiting indicator (MWI) does not come on.

8.

Press

Registrar Port

and

enter a Registrar Port number in the

Registrar Port

field for accessing the SIP registrar server. For example,

5060

.

Default is

0

.

9.

Press

until the Options List screen displays.

10.

Press

Restart

to restart the phone for the change to take affect.

IP Phone UI

«
...
211
212
213
214
215
...
»

Summary of Contents for 6737i

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments