Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key
A-202
41-001343-02 REV05 – 07.2014
Description (continued)
When a key is configured for BLF/List functionality, this parameter controls the ring
tone per key. The following ring tones are available:
•
Ring tone 1
•
Ring tone 2
•
Ring tone 3
•
Ring tone 4
•
Ring tone 5
•
Ring tone 6
•
Ring tone 7
•
Ring tone 8
•
Ring tone 9
•
Ring tone 10
•
Ring tone 11
•
Ring tone 12
•
Ring tone 13
•
Ring tone 14
•
Ring tone 15
•
Silence (ring tone off )
Note:
Ring tones are based on the current ring tone set configured on the IP phone.
Format
Integer
Default value
For BLF
For BLF/List
0 (Silence) 100 (Ring tone 1)
Range
For BLF
For BLF/List
0-6
100 (Ring tone 1)
0 (Silence)
101 (Ring tone 2)
1 (Normal)
102 (Ring tone 3)
2 (Normal delayed)
103 (Ring tone 4)
3 (Periodic)
104 (Ring tone 5)
4 (Periodic delayed)
105 (Ring tone 6)
5 (Low volume)
106 (Ring tone 7)
6 (Low volume delayed)
107 (Ring tone 8)
7 (The behavior is determined by the global
108 (Ring tone 9)
parameter “play a ring splash”.
109 (Ring tone 10)
–
If “play a ring splash” is defined as 0 then
110 (Ring tone 11)
the feature is disabled.
111 (Ring tone 12)
–
If “play a ring splash” is defined as 1 then
112 (Ring tone 13)
the behavior is the same as Normal.
113 (Ring tone 14)
–
If “play a ring splash” is defined as 2 then
114 (Ring tone 14)
the behavior is the same as Normal but the
115 (Silence)
ring splash plays when idle and also during
the active call state).
8 (In call delayed)
9 (In call periodic)
10 (In call periodic delayed)
11 (In call low volume)
12 (In call low volume delayed)
Note:
BLF alerting patterns 7 - 11 are applicable to the 6735i, 6737i, 6739i, 6755i, 6757i, 6757i
CT, 6865i, and 6867i IP phones only.
Example
For BLF:
topsoftkey1 ring splash: 1
For BLF/List:
topsoftkey1 ring splash: 101
