Configuration
178
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
•
File system state
(
=e3
)
In this view you can see the thematically structured file system's memory load. In
an AIN the file systems for all nodes can be viewed.
•
File browser
(
=2s
)
With the file browser you have access to the communication server file system
and create new folders as well as view, import, replace or delete files in the file
system.
Note:
File management is only accessible for
Administrators
in
Expert mode
.
See also:
You can find detailed information about the functions in WebAdmin help
for the corresponding view.
5. 6. 3
System reset
Restart of the communication server
A restart reboots the entire communication system. The configuration data is pre-
served.
A new start can be achieved in the following ways:
• With the pilot key on the front panel
See
"Carrying out a first start", page 215
• With WebAdmin in the maintenance settings
With the
Restart
button in the
System reset
(
=4e
) view.
Notes:
– Never disconnect the communication server from the power supply to
trigger a restart. This can result in data losses and prevent a restart.
– The restart is triggered immediately. All the active call and data con-
nections are interrupted.
First start of the communication server
A first start has the effect of resetting the communication server from scratch. The
system-specific data such as the system ID, system type, sales channel, licence
code, software generation and IP address of the system are preserved.
