Expansion Stages and System Capacity
54
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
Note
If the options card is used to connect a door intercom, it must be fitted to
slot IC2 (Aastra 415) or slot IC4 (Aastra 430). This means that only one
options card can be used for this purpose on each communication server.
If using control outputs and control inputs only, use the slots IC1 slots
(Aastra 415) or IC1, 2 and 3 (Aastra 430).
Aastra Intelligent Net:
A total of 22 ODAB options cards can be used in an AIN with Aastra 430 as
Master. However the maximum number of cards per communication
server has to be taken into account. An authorized user has the possibility
of operating all the door openers, door intercom system and control out-
puts in an AIN. One of the switch groups can be switched over using the
switch group interface on the options cards.
3. 3. 3
Wiring Adapter
The wiring adapters route the interfaces of the various interface cards with the
right connection diagram to the RJ45 sockets on the front panel. The adapters are
fitted to WA1...WA4 sockets.
Fig. 10
Types of wiring adapters
There are four types of wiring adapters, of which two (WA-TS0 and WA-TS1) have
different plug-in orientations. This determines the ratio of BRI-S interfaces to BRI-T
interfaces.
Note
A configuration with wiring adapter is mandatory. An incorrect or missing
configuration generates the corresponding error display on the LED dis-
play (F1...F4).
:$76
:$76
:$:
:$35,
