Operation and Maintenance
200
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
Replacing a cordless phone (a phone without microSD card)
1. Cancel the registration of the old cordless phone.
2. Register the new cordless phone. The cordless phone data is preserved until the
user number is also deleted.
Cancelling the registration of a cordless phone on the system
In WebAdmin in the edit view of the cordless phone, click
Cancel registration
.
Tip:
The identification of the cordless phone is deleted only if the cordless
phone is located within the coverage range of a radio unit; otherwise, it
must be deleted manually on the cordless phone (see the cordless
phone’s User’s Guide). The user number and data in the system are
retained.
Registering a cordless phone on the system
1. Prepare the cordless phone for registration (see the cordless phone’s User’s
Guide).
2. Prepare system for registration. In WebAdmin in the edit view of the cordless
phone, click
Register
.
Note:
With some phone types, the user of the cordless phone may have to iden-
tify himself to the system using an authentication code (AC). This authen-
tication code is issued after the
Register
button is clicked.
Replacing a cordless phone (a phone with microSD card)
1)
The special microSD card is suitable for replacement with wireless DECT phones
Aastra 620d/622d, Aastra 630d/632d and Aastra 650c. The card stores the cordless
phone's registration data on the communication server and the most important lo-
cal settings. This guarantees that in case of device defect - by taking the card along
- the operation on a replacement device can be continued within a short period
and without re-registering.
Each card (like each cordless phone) has its own, globally known unique serial
number for DECT devices (IPEI: International Portable Equipment Identity), used for
1)
Supported as of R2.1
