Configuration
175
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
5. 5
Configuring
The configuration steps are based on the information determined during the plan-
ning and, where applicable, the installation.
Whenever possible, use the planning and ordering software Aastra Plan, to set up
your communication system. Aastra Plan can be operated online after logging in at
Aastra Connect
http://connect.aastra.com
. Aastra Plan not only calculates the re-
quired hardware – it also lists the required licences for planned operation.
See also:
If you are setting up an Aastra 400 communication system for the first
time, we recommend to you the Getting-started package (see
"First
steps...", page 36
).
Setup wizard
The WebAdmin setup wizard takes you step by step through the setup of a basic
configuration and is suitable for initial communication server setup. The setup wiz-
ard is automatically called up when a new communication server is installed. Log-
ging on as administrator in WebAdmin (expert or default mode) allows you to also
start the setup wizard directly from the WebAdmin navigation tree.
The setup wizard comprises the following steps:
1. Activating licences
2. Setting up the IP addressing
3. Configuring media resources
4. Setting up the numbering plan
5. Setting up SIP providers
6. Setting up users, terminals and DDIs
7. Setting up the Auto Attendant
For each step you can display a help page or see it in the lower part of the window
where it is already displayed. You can skip individual steps of the setup wizard or
exit the setup wizard at any time in order to return to the WebAdmin start page.
Configuration assistant
The configuration assistant goes further than the setup wizard and helps you to
configure a communication system in sequence, from scratch. Logging on as ad-
ministrator in WebAdmin (expert or default mode) allows you to display the config-
uration assistant on the WebAdmin start page.
