Operation and Maintenance
214
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
6. 4. 4. 3
Forced restart without database backup
In all operating states a very long keypress (VLC) on the pilot key forces the com-
munication server to restart. The restart is initiated
after the key is released
.
Note:
Forced restart is the same as power failure and can result in loss of data.
This may prevent a communication server start-up. Forced restart should
only be initiated if normal restart (via the control key or with WebAdmin)
is no longer possible for any reason.
6. 4. 4. 4
Enabling / disabling password-free access
The following sequence changes the status of the password-free access:
Requirement:
The system is in
"Application Command Mode", page 208
.
1. Press the pilot key with a short keypress (SC) until "F3" lights up.
"F3" indicates the current status: steady red= disabled, steady orange = ena-
bled.
2. Press the pilot key with a long keypress (LC)
After 2 second keypress "F3" lights up green by way of confirmation.
When the key is released, the status changes and the system jumps back to
original Mode.
"F3" indicates the current status: inactive = disabled, steady orange = ena-
bled.
Note:
You are strongly advised to keep the password-free access open only for
as long as necessary. For security reasons it is automatically deactivated
again after a restart or at the latest after 60 minutes.
