A&D FC-50Ki, Instruction Manual

Page: 12 / 64

10
2-2. To Start Counting 2-2. To Start Counting 2-2. To Start Counting 2-2. To Start Counting
1. Press the STANDBY/OPERATE key to turn the scale on when displaying the standby
indicator. Or press the RESET key to clear
any previous operations.
2. The three LED’s on the UNIT WEIGHT BY
keys will blink. This is to prompt you to select a
method for entering a unit weight for operation.
3.
S
elect one of the ways to enter or recall the unit weight (the weight of one item of
what you are counting), and refer to the section noted for more instructions.
STABLE
# # # # # # #
888881 0
&&
F?I
!
W 2 W E I G H T ( k g )
1213456789 0.000
!
2 3 A S A M P U W ( g )
12341567 0.00000 4567890123456
7
ZERO
TOTAL
M+
TARE
ENTERED
SCALE
You can return to this point at any time during
operation by pressing the RESET key.
(This doesn’t clear the entered tare weight
and M+ memory.)
RESET
KEY-
BOARD
SAMPLE
ID.
UNIT WEIGHT BY
By using a sample: Section “
2-3 2-3 2-3 2-3
”
q
10 sample size
q
5, 25, 50 or 100 sample size
q
Desired sample size
q
Desired sample size not to use the
SAMPLE
key
By using the l0-key pad: Section“
2-4 2-4 2-4 2-4
”
By stored lD number: Section“
2-5
2-5 2-5
2-5
”