A&D FC-50Ki, Instruction Manual

Page: 25 / 64

23
4-4. 4-4. 4-4. 4-4. Unit Weight, Tare, Comparator Limits & Total Count Stored Unit Weight, Tare, Comparator Limits & Total Count Stored Unit Weight, Tare, Comparator Limits & Total Count Stored Unit Weight, Tare, Comparator Limits & Total Count Stored
The scale is initially set to store the ID numbers with a unit weight and an item code
only. However, it can be set to store a tare weight, comparator limits and/or total count
also by setting F-Function
f-01-05
.
1. First register a unit weight and a tare weight by
any method. If necessary, set the comparator
limits and use the M+ accumulation.
2. Go to step 2 of section “
4-2. Store Unit Weight 4-2. Store Unit Weight 4-2. Store Unit Weight 4-2. Store Unit Weight
By ID Numbers By ID Numbers By ID Numbers By ID Numbers
”.
When you recall a unit weight by the ID key, the tare, comparator limits and/or total
count are also recalled along with the unit weight.
# # # # # # #
888-51 0
&&
F?I
!
2 A W E I G H T ( k g )
1234561789 0.000 4678 id-123456
!
2 3 S A M A U U W ( g ) 1 A B C D E F G H I J K L
12345617 111.000
“
id-00000
id-00000 id-00000
id-00000
”, the special memory area, does not store a tare
weight, comparator limits and total count along with unit weight.