A&D FC-50Ki, Instruction Manual

Page: 8 / 64

6
1-6. Last Unit Weight Used Feature 1-6. Last Unit Weight Used Feature 1-6. Last Unit Weight Used Feature 1-6. Last Unit Weight Used Feature
There are a number of ways to register a unit weight to count. The FC-
i
scale has a
feature to keep the last unit weight used in memory. This can be handy if you turn the
scale display off and then want to return to the same unit weight, or you accidentally
clear the unit weight by pressing the
RESET key.
When a unit weight is registered it is automatically placed in the ID “
id-000000
” and
remains there until a new unit weight is entered, or the power is disconnected. It can be
recalled by the following:
1. When the three UNIT WEIGHT BY LED’s
are blinking at display ON, or if the RESET
key has been pressed;
2. Press the ID key.
" id-000000 " will be displayed
with
ï
000000
ð
blinking.
3. Press the ENTER key.
The scale will recall the previous
unit weight.
Automatic Last Unit Weight Used
Automatic Last Unit Weight Used Automatic Last Unit Weight Used
Automatic Last Unit Weight Used
When you turn the display on, the scale can automatically recall the last unit weight
used from memory, if desired.
q
Set the F-Function f-01-04 at “ 1 ”. The scale will recall the last unit weight used,
when the display is turned ON.
ID.
STABLE
# # # # # # #
8888810
&&
F?I
!
W 2 W E I G H T ( k g )
1234561789 0.000 4578 id-000000
!
2 3 S A M U U W ( g )
12345670.00000
ZERO
TOTAL
M+
TARE
ENTERED
SCALE
# # # # # # #
------ 0
&&
F?I
!
W 2 W E I G H T ( k g )
1234516--- 0.000 4568 id-000000
!
2 3 S A M A U U W ( g )
12345617 12.0000
ENTER
UNIT WEIGHT BY