A&D FC-50Ki, Instruction Manual

Page: 5 / 64

3
1. INTRODUCTION 1. INTRODUCTION 1. INTRODUCTION 1. INTRODUCTION
1-1. Unpacking 1-1. Unpacking 1-1. Unpacking 1-1. Unpacking
q Unpack the scale carefully and keep the packing material if you are likely to transport
the scale again in the future.
q
In the carton you should find this manual plus:
• The counting scale.
• An AC adapter (check that the AC input rating is correct).
Remove the protective packing materials from around the scale and between the pan
and scale casing.
1-2. Setting Up Your Scale
1-2. Setting Up Your Scale 1-2. Setting Up Your Scale
1-2. Setting Up Your Scale
1. Place the scale on a suitable weighing surface (Refer to
Best Conditions For Best Conditions For Best Conditions For Best Conditions For
Weighing Weighing Weighing Weighing
of next page) and turn the adjustable feet until the spirit level shows that
the scale is level.
2. Plug in the AC adapter. The AC input requirements could be l00, 120, 220, 230 or
240 Volts (50/60Hz) depending on where used, so, please check that the adapter is
correct. Ground the scale to avoid a problem of the static electricity.
Spirit level
Leveling foot
Earth terminal
Weighing pan
Remote scale slot
AC adapter jack
OP-02 slot
OP-03/04 slot
Calibration switch cover
RS-232C
Remove Packing Material
Instruction Manual
AC Adapter
Please confirm that the AC
adapter type is correct for your
local voltage and receptacle type.