3Com CoreBuilder 9000, User Manual

Page: 277 / 468

LES Address 277
Update ELAN LES-BUS
Address
Update the LES address of the specified ELAN. Enter the LES address user
part, which consists of 6 bytes separated by dots. The last byte is a
selector byte (0-F) that signifies the sequential identifier of the LES in the
CoreBuilder 9000 ATM Enterprise Switch.
Command Actions
Command Result
Example
Enter:
2 2 3 1 1 2 c0.da.60. 0.49. 0
The LES-BUS ATM addresses for the ELAN with ELAN ID #2 are updated.
Enter menu sequence:
(2) LEM: LAN Emulation
(2) LES: LE Services
(3) ELN: ELANs Info
(1) LSU: LES Setup
(1) ADR: Set & save LES-BUS address
Enter a parameter at the prompt
Parameter Format or Range
ELAN ID
The ELAN ID number,
1–16
ATM Address
6 bytes of user part, separated with dots
Direct access sequence:
2 2 3 1 1
[parameters]
System action taken: The LES-BUS ATM addresses for the specified ELAN are
updated. The update takes place immediately.