3Com CoreBuilder 9000, User Manual

Page: 109 / 468

Configuring Interface Modules 109
Reset Interface Card Reset the interface module in a specific slot, or all the interface modules.
Command Actions
Command Result
Example
Enter:
1 5 8 0
The following prompt is displayed:
Do you really want to reset all the interface cards (Y/N)?
Enter
y
to confirm. The following message is displayed:
The interface card was reset.
Enter the menu sequence:
(1) SYS: Platform Configuration
(5) IFC: Interface Cards
(8) RST: Reset Interface Card
Enter a parameter at the prompt
Parameter Format or Range
Slot Number 1 - 16 or
0
for all
Direct access sequence:
1 5 8
[parameters]
System action taken: The selected interface module is reset.
System message display:
The interface card was reset.