3Com CoreBuilder 9000, User Manual

Page: 136 / 468

136 C
HAPTER
6: M
ANAGING
N
ETWORK
I
NTERFACES
Display Static ATM
Addresses at Port
Display static ATM addresses registered for the specified port. This
command includes ATM addresses that have been entered manually via
LMA or learned addresses over Network-to-Network Interface (NNI)
connection (E-IISP). This command also displays member IDs for each
ATM address registered at the port.
Note that, similar to ILMI registration, each port can have multiple ATM
addresses.
For more information, see “Display User Management Entities (UME)
ATM Addresses at Port” on page 132.
Command Actions
Command Result
Enter the menu sequence:
(3) CON: Connections
(1) ADD: Get ATM Addresses
(2) STC: Get Static and NNI Address
at Port
Enter a parameter at the prompt
Parameter Format or Range
Port ID <slot.group.port> (
0.0
for all ports)
Direct access sequence:
3 1 2
[parameters]
System action taken: All ATM addresses registered for the specified port are
displayed.
System message display: Information is displayed as shown in the example.