3Com CoreBuilder 9000, User Manual

Page: 140 / 468

140 C
HAPTER
6: M
ANAGING
N
ETWORK
I
NTERFACES
Delete All ATM
Addresses at Port
Delete the ATM addresses registered at the specified port including those
registered by ILMI and those that were created manually through the
LMA. The addresses are deleted from the MIB at the port (they are
de-registered).
When you delete addresses from a specific port, any existing connections
associated with them are not deleted.
Command Actions
Command Result
Example
Enter:
3 4 2 1 3.1.2
The following message is displayed:
All ATM addresses for port 3.1.2 were deleted.
Enter the menu sequence:
(3) CON: Connections
(4) S&C: Setup and Config Connections
(2) STP: Static ATM Addresses Setup
(1) DAD: Delete all ATM Addresses of
Port
Enter a parameter at the prompt
Parameter Format or Range
Port ID <slot.group.port> or
0.0
for all ports
Direct access sequence:
3 4 2 1
[parameters]
System action taken: The ATM addresses at port are deleted.
System message display:
All ATM addresses for port <x.x.x> were
deleted.