3Com CoreBuilder 9000, User Manual

Page: 147 / 468

Port Interface Type 147
Update Port Interface
Type
Update the Interface Type (NNI, UNI, or GWY) for a specified port of the
CoreBuilder 9000 ATM Enterprise Switch.
Command Actions
Command Result
Example
Enter:
1 1 3 4 3.1.2 1
The following message is displayed:
This operation will release all connections of the specified
port(s)!
Are you sure (Y/N)?
Enter
y
to confirm. The following message is displayed:
UNI type was set.
The Interface type for port 3.1.2 is updated to UNI.
Enter the menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(3) NNI: NNI Setup
(4) SIF: NNI Set Interface Type
Enter a parameter at the prompt
Parameter Format or Range
Port number <slot.group.port> (
0.0
for all ports)
NNI interface type
0
to set interface type to NNI
1
to set interface type to UNI
2
to set interface type to GWY
Direct access sequence:
1 1 3 4
[parameters]
System action taken: The interface type for the specified port is updated.
System message display:
<type> type was set.