144
C
HAPTER
6: M
ANAGING
N
ETWORK
I
NTERFACES
Delete All Inactive
Addresses
Delete all ATM addresses that do not exist for the port but are currently
present in flash memory. These ports are not installed or failed.
Command Actions
Command Result
Example
Enter:
3 4 2 5
The following prompt is displayed:
Delete all inactive addresses from flash!
Are you sure [y/n]
Enter
y
to confirm. The following message is displayed:
Delete inactive addresses successfully.
Member number The member number provides a sequential numbering of ATM
addresses registered at a port. It is used to specify the
connection.
Man
Always set to YES.
Table 19
Parameters (continued)
Name
Description
Enter the menu sequence:
(3) CON: Connections
(4) S&C: Setup and Config Connections
(2) STP: Static ATM Addresses Setup
(5) RES: Reset Saved Addresses
Enter a parameter at the prompt
Parameter
Format or Range
Confirm delete
y
or
n
Direct access sequence:
3 4 2 5
System action taken:
All inactive ATM addresses are erased.
System message display:
Delete inactive addresses successfully.
Summary of Contents for CoreBuilder 9000
