3Com CoreBuilder 9000, User Manual

Page: 107 / 468

Configuring Interface Modules 107
Set Port Clock Mode Set the port clock operational mode of selected port as Internal or
External and save to flash memory. You are prompted to specify a port
and a mode.
Command Actions
Command Result
Example
Enter:
1 5 4 1.1.2 1
The following message is displayed:
Setting clock source mode has completed successfully.
The clock operational mode of port 1.1.2 is set to external.
Enter the menu sequence:
(1) SYS: Platform Configuration
(5) IFC: Interface Cards
(4) PCK: Set Port Clock Mode
Enter a parameter at the prompt
Parameter Format or Range
Port Number <slot.group.port> (
0.0
- For all)
Port Clock Source
0
for Internal
1
for External
Direct access sequence:
1 5 4
[parameters]
System action taken: The clock operational mode of the selected port on the
interface module is set and saved.
System message display:
Setting clock source mode has completed
successfully.