3Com CoreBuilder 9000, User Manual

Page: 240 / 468

240 C
HAPTER
9: M
ANAGING
LAN E
MULATION
LAN E
MULATION
C
ONFIGURATION
S
ERVICE
(LECS)
O
PERATIONS
LECS Address
You can configure the resident LECS address as follows:
Display Resident LECS Address
Update Resident LECS Address
CAUTION: Before you reboot the switch, wait three minutes after each
LECS update operation to allow the change to be stored in flash.
Display Resident LECS
Address
Display the address of the resident LECS.
Command Actions
Command Result
Example
Enter:
2 1 1
The following information is displayed. The first 13 bytes represent the
network prefix of the CoreBuilder 9000 ATM Enterprise Switch and the
last 7 bytes represent the user part.
Enter menu sequence:
(2) LEM: LAN Emulation
(1) LCS: LE Config Service
(1) LGA: Get resident LECS address
Direct access sequence:
2 1 1
System action taken:
The address of the resident LECS is displayed.
System message display: Information is displayed as shown in the example.
LECS ADDR is: 47.0.0.0.0.0.3c.0.0.a0.0.0.0.0.a0.3e.0.0.1.0