4-7
[Sysname-GigabitEthernet1/0/1] qos gts queue 1 cir 512
Configuring the Line Rate
Configuration Procedure
Follow these steps to configure the line rate:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter
interface
view
interface interface-type
interface-number
Enter
interface
view or
port group
view
Enter port
group
view
port-group manual
port-group-name
Use either command
Settings in interface view take
effect on the current interface;
settings in port group view take
effect on all ports in the port
group.
Configure the outbound
line rate for the
interface/port group
qos lr outbound cir
committed-information-rate
[
cbs
committed-burst-size
]
Required
Configuration Example
Limit the outbound line rate of GigabitEthernet 1/0/1 to 512 kbps.
# Enter system view.
<Sysname> system-view
# Enter interface view.
[Sysname] interface gigabitethernet 1/0/1
# Limit the outbound line rate of GigabitEthernet 1/0/1 to 512 kbps.
[Sysname-GigabitEthernet1/0/1] qos lr outbound cir 512
Displaying and Maintaining Traffic Policing, GTS, and Line Rate
On the Switch 4210G series, you can configure traffic policing in policy-based approach. For related
displaying and maintaining commands, refer to
Displaying and Maintaining QoS Policies
.
To do…
Use the command…
Remarks
Display interface GTS
configuration information
display qos gts interface
[
interface-type
interface-number
]
Available in any view
Display interface line rate
configuration information
display
qos lr interface
[
interface-type
interface-number
]
Available in any view
Summary of Contents for 4210G Series
Page 459: ...4 8...
Page 493: ...12 1...
Page 968: ...19 6 000f e235 dc71 1 Config static GigabitEthernet 1 0 1 NOAGED 1 mac address es found...