3Com 4210G Series, Configuration Manual, Page: 1086 / 1133

26-13
Removing a member device
To do… Use the command… Remarks
Enter system view
system-view
—
Enter cluster view
cluster
—
Remove a member device from
the cluster
delete-member member-number
[
to-black-list
]
Required
Rebooting a member device
To do… Use the command… Remarks
Enter system view
system-view
—
Enter cluster view
cluster
—
Reboot a specified member
device
reboot member
{
member-number
|
mac-address mac-address
} [
eraseflash
]
Required
Configuring the Member Devices
Enabling NDP
Refer to Enabling NDP Globally and for Specific Ports .
Enabling NTDP
Refer to Enabling NTDP Globally and for Specific Ports .
Manually Collecting Topology Information
Refer to Manually Collecting Topology Information .
Enabling the Cluster Function
Refer to Enabling the Cluster Function .
Deleting a Member Device from a Cluster
To do… Use the command… Remarks
Enter system view
system-view
—
Enter cluster view
cluster
—
Delete a member device from the cluster
undo administrator-address
Required
Configuring Access Between the Management Device and Its
Member Devices
After having successfully configured NDP, NTDP and cluster, you can configure, manage and monitor