
6-8
Configuring CC on MEPs
After the CC function is configured, MEPs can send CCMs mutually to check the connectivity between
them.
Configuration Prerequisites
Before configuring this function, you should first complete the MEP configuration.
Configuring Procedure
Follow these steps to configure CC on a MEP:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Configure the interval field
value in the CCM messages
sent by MEPs
cfd cc interval
interval-field-value
service-instance instance-id
Optional
By default, the interval filed
value is 4.
Enter Ethernet port view
interface interface-type
interface-number
—
Enable CCM sending on a
MEP
cfd cc service-instance
instance-id mep mep-id
enable
Required
Disabled by default
The relationship between the interval field value in the CCM messages, the interval between CCM
messages and the timeout time of the remote MEP is illustrated in
Table 6-2
.
Table 6-2
Relationship of the interval field value, the interval between CCM messages and the timeout
time of the remote MEP
The interval field value
The interval between CCM
messages
The timeout time of the
remote MEP
4
1 second
3.5 seconds
5
10 second
35 seconds
6
60 seconds
210 seconds
7 600
seconds
2100
seconds
On different devices, the MEPs belonging to the same MD and MA should be configured with the same
time interval for CCMs sending.
Configuring LB on MEPs
The LB function can verify the link state between two ends after CC detects a link fault.
Summary of Contents for 4210G Series
Page 459: ...4 8...
Page 493: ...12 1...
Page 968: ...19 6 000f e235 dc71 1 Config static GigabitEthernet 1 0 1 NOAGED 1 mac address es found...